Okay Guys , thoughts on intakes, so the story so far,
289 Block to be machined Minimally, .020" over and decked etc etc
New scat cast stroker crank 3.400
New Scat I beam rods
Pistons, still sourcing??
Heads AFR 185-58cc
New Voodoo 272 cam
Hyd roller lifts/rockers, still sourcing??
From the advise and what l have read, a 750 carb seems to be the go, and reading "Boofs signature combos" Quickfuel seems to be his carb of choice, sitting on an edelbrock performance airgap manifold with a 1" spacer plate,
Now, There is 750's and 750's, many to choose from, mech or vac secondaries,this is the limit of my knowledge, does the coupling with an auto dictate the secondaries, does an Ice ignition have any influence? Running the white flag up again,
Any thoughts? Thanks....,