2015 mustang delivery

[Dingo]

[quote author=RuffCoupe link=topic=28223.msg284961#msg284961

thanks for the support...dealer has tried but I think its a stuff up between Sydney and ford at melb and then the USA.

I'm seriously thinking of chucking in my job in Darwin when it comes in. the thought of having to garage it in Sydney for six months while I'm at the top end is too much.

life's too short...I'd would appreciate any feedback from anyone whose pony was built around 12 dec 15 and if your vehicle is on a boat...respect dingo

[Salthorse]

My '69 finally has its stable mate . . .  and what a stable mate it is. 

[Dingo]

Really nice.  How do you decide which one to go out in.  Respect dingo

[Salthorse]

Good question Dingo. Might go for odds and evens. The '69 on odd days and the '16 on even days. The sound system in the '16 with its DAB radio is certainly better than the one in the classic Mustang.

[GT Sally]

The best thing is the "cooled seats".....in Sydneys hot climate atm, I've used this function more than fuel....lol

[Dingo]

Good question Dingo. Might go for odds and evens. The '69 on odd days and the '16 on even days. The sound system in the '16 with its DAB radio is certainly better than the one in the classic Mustang.

Was going to say was it like having two wives???

[Salthorse]

Two wives are too expensive 

[scollist]

My '69 finally has its stable mate . . .  and what a stable mate it is. 

Are you bringing the new toy to Gembrook on Sunday Dave? Looking forward to checking it out if you do.

Cheers
Shane

[Salthorse]

I am booked into the Gembrook gathering. See you then.

[Dingo]

Two wives are too expensive 

Yup. But not two ponies.

[JasonK]

[quote author=RuffCoupe link=topic=28223.msg284961#msg284961

thanks for the support...dealer has tried but I think its a stuff up between Sydney and ford at melb and then the USA.

I'm seriously thinking of chucking in my job in Darwin when it comes in. the thought of having to garage it in Sydney for six months while I'm at the top end is too much.

life's too short...I'd would appreciate any feedback from anyone whose pony was built around 12 dec 15 and if your vehicle is on a boat...respect dingo

Mine was built on December 11:

Shipping details:

 

[Dingo]

Mine was built on December 11:

Shipping details:

Thanks for that.  How did u get this info. I've tried my VIN on all the usual sites.  Respect dingo

[JasonK]

Thanks for that.  How did u get this info. I've tried my VIN on all the usual sites.  Respect dingo

https://www.2wglobal.com/webapps?frameId=145462324288818380&url=https%3A%2F%2Fatt.2wglobal.com%2Fgstattweb%2Focean.do%3Fmethod%3DgetDefaultOceanQuickSearchPage

Put your VIN on the cargo ID (don't worry about capital letters or not, it works that out for you).

If you want to get an idea of the scale of this port, check out 2700 Broening Hwy Baltimore on Google Maps. The scale is fair dinkum breathtaking. The queue of cars to get through the gate onto a RO RO is hard to believe.

[GT Sally]

Thanks for that.  How did u get this info. I've tried my VIN on all the usual sites.  Respect dingo

This info has been posted many many times....just got to read old posts

[JasonK]

In theory at least, my Mustang should be in the middle of being loaded into the Tamesis today. It is scheduled to sail tomorrow US time. Dingo, your one might be on there as well?

And yes, the excitement level is just starting to stir.....

[RYN00S]

Mine set sail on the 10th February on the Faust. It passed through the Panama Canal a few days ago and is on its way to French Polynesia. It reaches Port Kembla on the 14th March, so I am thinking April fools day if I'm lucky....

[CJ42]

I got an email from ford with the shipping info, from
What I can tell it when through the Panama Canal 4 or so days ago, but the site is bloody confusing and I can't figure out eta etc.

[Pedro]

https://www.2wglobal.com/webapps?frameId=145462324288818380&url=https%3A%2F%2Fatt.2wglobal.com%2Fgstattweb%2Focean.do%3Fmethod%3DgetDefaultOceanQuickSearchPage

Put your VIN on the cargo ID (don't worry about capital letters or not, it works that out for you).

If you want to get an idea of the scale of this port, check out 2700 Broening Hwy Baltimore on Google Maps. The scale is fair dinkum breathtaking. The queue of cars to get through the gate onto a RO RO is hard to believe.

Now that's a BIG RO - RO facility!

[Bilby]

Re delivery dates FYI.
Emails from Ford dealer
15/9/2015 Order placed in Melbourne

20/1/2016 No delivery date - Order confirmed

23/2/2016 Begin production October 2016 anticipated arrival Feb 2017, "....SUBJECT TO CHANGE...."

We wait.
Bilby.

[IngotGT]

I got an email from ford with the shipping info, from
What I can tell it when through the Panama Canal 4 or so days ago, but the site is bloody confusing and I can't figure out eta etc.

try this site?
https://www.vesselfinder.com/vessels

[GregC]

Here is my GT Manual in Race Red. Picked it up last Thursday.

[CJ42]

Ok, so I've completely misread something a week ago thinking my car was gonna be late march/april.
I'm in Canberra and my car is due in Brisbane on Saturday, wonder how long till I can get it? Need to sell my other car asap lol.

[mwizz]

Congrats Greg

[dingobreath]

Here is my GT Manual in Race Red. Picked it up last Thursday.

Looks great! Can you confirm if the front gill LED's are disabled on yours?

[CJ42]

try this site?
https://www.vesselfinder.com/vessels

Thanks mate that was much easier to navigate, apparently my car is due in Brisbane on Saturday. Lol!