Author Topic: What did you do for your Mustang today? (Read 656808 times)

Scott66 · « **Reply #1750 on:** April 14, 2016, 12:34:38 pm »

I reckon there would have been an awesome echo from your beast in that underground carpark Lou

Ruggie · « **Reply #1751 on:** April 14, 2016, 01:55:02 pm »

purchased CTP, getting close now!

66vert · « **Reply #1752 on:** April 14, 2016, 04:31:38 pm »

Quote from: Scott66 on April 14, 2016, 12:34:38 pm

I reckon there would have been an awesome echo from your beast in that underground carpark Lou

Yeah Scotty the last time there i set off two car alarms, that's when you know your car's tuff

Red67Coupe · « **Reply #1753 on:** April 18, 2016, 12:03:22 am »

I made up brackets to fit my new personalised number plates

since the old plates were just screwed on crooked and bent up to fit especially the front

R_Beckhaus · « **Reply #1754 on:** April 18, 2016, 07:40:26 am »

I retired so I can spend more time with the old girl, and the Mustang!

GLENN 70 · « **Reply #1755 on:** April 18, 2016, 07:56:34 am »

Ron I am glad you said with the old girl and not on the old girl

R_Beckhaus · « **Reply #1756 on:** April 18, 2016, 04:21:11 pm »

Either/or, Glenn.

Many a fine fiddle is played to an old tune....

coops · « **Reply #1757 on:** April 18, 2016, 06:40:39 pm »

Got a set of 14x6 & 14x7 SS Cragars from a mate for my 66 Mustang so i gave them a nice polish. Come up very nice. Should look good on the car.

JadeMach1 · « **Reply #1758 on:** April 18, 2016, 06:57:21 pm »

Fitted set of replacement bonnet hinges to Mach1

Should have done year ago hood now opens and closes with one finger..

Evo · « **Reply #1759 on:** April 19, 2016, 07:40:35 am »

I ordered brand new front brakes, pads ,drums. wheel cyclinders and springs yesterday as well as a dash matt to stop the glare from the the dash pad. Gotta make a start some where to get the old pony up to a better standard.

Ruggie · « **Reply #1760 on:** April 19, 2016, 08:21:14 am »

Today i am going to get registered and go for a wee drive

RuffCoupe · « **Reply #1761 on:** April 19, 2016, 11:24:43 am »

Quote from: Ruggie on April 19, 2016, 08:21:14 am

Today i am going to get registered and go for a wee drive

Thanks for dropping the package off to SP's place Alan - it's all coming together.

Enjoy your drive

Cheers

John

Ruggie · « **Reply #1762 on:** April 19, 2016, 12:52:05 pm »

No problem john.
thanks

GT Sally · « **Reply #1763 on:** April 19, 2016, 06:03:47 pm »

Fitted a new exhaust on my S550 at my boys workshop (well I only watched, supervised & laboured)....Magnaflow Street...very happy & glad I didn't choose the "competition" system, street is quite a bit louder than stock. thanks to "EXHAUSTED" for his recommendation.
The original system was painted black & once removed, unveiled that it had been spray painted in situ as the top of the system was bare metal....guess that's what we can expect from a sausage factory....

littlejohn · « **Reply #1764 on:** April 20, 2016, 05:31:42 pm »

are you having it tigged and clamps removed??

GT Sally · « **Reply #1765 on:** April 20, 2016, 05:48:52 pm »

Quote from: littlejohn on April 20, 2016, 05:31:42 pm

are you having it tigged and clamps removed??

NOPE!

GLENN 70 · « **Reply #1766 on:** April 25, 2016, 05:32:30 pm »

Took the leaking brake master cyl off the 70 Mach 1 . What a crap job to do because it would not come off the booster studs because when you moved it a 1/4 of an inch it hit the tower

. Its off and will be rebuilt this week I hope .

GEOFF289 · « **Reply #1767 on:** April 25, 2016, 06:48:40 pm »

Installed my new (second hand - thanks Simon) Monte Carlo bar. Pretty much dropped straight in so seems my shock towers are more or less where the San Jose factory put them. Think I will have to cut the "ear" off the aircon compressor. Am I right in thinking torque movement of the engine will lift it on the left hand side?

Dwayne · « **Reply #1768 on:** April 25, 2016, 09:22:51 pm »

Took my kids and the 65 on it's first Zippel cruise through the Adelaide Hills to a winery in McLaren Vale. Weather was perfect and there were classics and hot rods everywhere.

chopmgw · « **Reply #1769 on:** April 26, 2016, 08:18:21 am »

Quote from: Dwayne on April 25, 2016, 09:22:51 pm

Took my kids and the 65 on it's first Zippel cruise through the Adelaide Hills to a winery in McLaren Vale. Weather was perfect and there were classics and hot rods everywhere.

Was great weather and a great event.

Tang67 · « **Reply #1770 on:** April 26, 2016, 01:45:43 pm »

Drove out to Kandos to visit mate and family on Sunday - pretty good run in the old Tang. Must've been a do at Mudgee because there were several Classic vehicles travelling around the countryside. Hit the typical traffic queues at Mt Victoria/Blackheath returning to Sydney, but the old gal found the cold conditions more suitable than the recent hot weather. (Noticed it was idling rough when standing in traffic on only some occasions, so don't know what that was all about ... she probably had the shits with the bumper to bumper traffic!)

Husky350 · « **Reply #1771 on:** April 27, 2016, 07:44:02 pm »

Quote from: GEOFF289 on April 25, 2016, 06:48:40 pm

Installed my new (second hand - thanks Simon) Monte Carlo bar.

Good to see unwanted parts going to good homes

GT Sally · « **Reply #1772 on:** April 27, 2016, 07:51:19 pm »

Waxed the wheels on the S550 to make cleaning the horrid brake dust easier

Ruggie · « **Reply #1773 on:** April 29, 2016, 06:32:01 pm »

Calibrated the speedo. Went for a drive then picked up the kids.
Great day.

Scott66 · « **Reply #1774 on:** May 01, 2016, 06:29:02 pm »

Left it parked safe and dry in the garage and took the wife's Mini Cooper S out for a few "warm" laps in the rain at the Euro day at Lakeside today

What did you do for your Mustang today?

News:

Author Topic: What did you do for your Mustang today? (Read 656808 times)

R_Beckhaus

R_Beckhaus