Author Topic: 67 fasty finally here and work started (Read 54799 times)

anfo99 · « **Reply #50 on:** October 10, 2013, 09:15:28 am »

wow it's come a long way and looking better by the day

67fasty.sm · « **Reply #51 on:** October 13, 2013, 03:58:21 pm »

thanks anfo how is your car coming along ? I have done alittle more since then took ages , crap job to do very frustrating but came up ok

Ash · « **Reply #52 on:** October 13, 2013, 04:03:48 pm »

That's nice. Love the red interior and white body.

67fasty.sm · « **Reply #53 on:** October 13, 2013, 09:02:43 pm »

Thanks Ash really appreciate it !! chucked the rear seats in yesterday for a quick look , and rolled it outside to see what it looks like in the sunshine

chopmgw · « **Reply #54 on:** October 14, 2013, 08:43:16 am »

Looks great Fasty.
Its come a long way and ur so close now.

67fasty.sm · « **Reply #55 on:** October 14, 2013, 09:40:28 pm »

thanks chops! if only it was as close as yours , i always look at your paint job and think that it looks awesome everything looks just right !!
regards shane

Cage · « **Reply #56 on:** October 15, 2013, 07:28:20 pm »

Nice one Shane, looking beautiful mate.

67fasty.sm · « **Reply #57 on:** October 16, 2013, 08:48:44 pm »

aww cage you are such a smoothy !!

Cruzin 67 · « **Reply #58 on:** October 25, 2013, 07:20:02 pm »

Holy crap. Always worth saving! Take my hat off to you mate. Some serious injuries over time to that car! Some people would just throw their hands in the air and say, too hard!?....keep posting pics. The guys on this forum are very supportive of anyone doing what you are. Good on you mate, it will be worth it!

67fasty.sm · « **Reply #59 on:** October 26, 2013, 08:40:50 am »

thanks cruzin ! really appreciate the kind words, gettin to the pointy end of the stick now

67fasty.sm · « **Reply #60 on:** November 13, 2013, 08:36:53 pm »

Started blocking out the stripes and getting everything nice and smooth , started with 800 grit to remove the ridge , then re cleared and rubbed out with 2000 grit to make it nice and flat . I have only hand buffed at this stage but happy with the out come.
Also fitted the tail lights which was pretty straight forward , the same cant be said fitting the repo trim on the repo qtr extension think i measured about bloody fifty times before drilling the mounting holes hopefully have got it right.

Ash · « **Reply #61 on:** November 13, 2013, 11:00:42 pm »

Looks very nice. I am digging the white

67fasty.sm · « **Reply #62 on:** January 02, 2014, 01:02:34 pm »

Not too much has happened since the last update had to build a sundeck ! but have managed to complete the rear end . What a nightmare fitting the trim and the bumper . The trim was terrible cause its aluminium and its repo and i was learning as i went . when go to push the trim on over the clip the back of the trim is to long and just folds back on itself . ended up having to file down where each of the clips go in so it could snap on

And dont talk to me about bumpers gees ! i tell ya the rubber mallet got a good work out

had to roll the ends in to get some where looking like it fits over it all now close enough for me .

atleast i can sit on the deck now which is on the side of the shed drink beer and feel sorry for myself when it all turns to crap through that timber door

Rapid428 · « **Reply #63 on:** January 02, 2014, 02:42:20 pm »

Great to see the progress she's looking fantastic

Your deck (checked spelling) is also looking good

Ash · « **Reply #64 on:** January 02, 2014, 03:01:20 pm »

Everyone loves a big deck

www.youtube.com/watch?v=nz82fjXqFQ4

That trim must be so frustrating, especially with fresh paint.

Rapid428 · « **Reply #65 on:** January 02, 2014, 03:09:50 pm »

68Coupe · « **Reply #66 on:** January 02, 2014, 03:35:13 pm »

Macka · « **Reply #67 on:** January 02, 2014, 04:32:57 pm »

The car is looking great.

chopmgw · « **Reply #68 on:** January 02, 2014, 05:13:53 pm »

Nice to see a bit of bling on there.
I know exactly what u mean about the repro trim, having been there myself.
Just persevere.
U will forget all about it when ur cruising .

anfo99 · « **Reply #69 on:** January 04, 2014, 04:21:35 pm »

Shane,

She's looking sweet mate.

1969 mustang · « **Reply #70 on:** January 11, 2014, 09:07:03 pm »

nice............ very nice

MustangMollie · « **Reply #71 on:** January 11, 2014, 09:42:27 pm »

So awesome to see where you started and where she's at now! Fantastic colour combo too. Great work!

67fasty.sm · « **Reply #72 on:** January 14, 2014, 11:13:20 am »

thanks mollie , yeah wont be any show winner thats for sure but , should be a nice clean driver when its done . Had to start with a shit box was the only way to get in the system otherwise it would never had happen. hope you find a nice 67 and join the brotherhood !

shane

Macka · « **Reply #73 on:** January 31, 2014, 03:09:01 pm »

http://www.toilette-humor.com/funny_adult_videos/dck_maintenance.shtml

How to keep it clean..

67fasty.sm · « **Reply #74 on:** February 01, 2014, 09:20:01 am »

very funny macka , i clean my dick oh i mean deck regularly

67 fasty finally here and work started

News:

Author Topic: 67 fasty finally here and work started (Read 54799 times)