Author Topic: C4 inspection plate bolt sizes (Read 5218 times)

j1autotech · « **on:** September 22, 2009, 05:10:06 pm »

Hey guys,

I'm missing the 2 bolts that hold the inspection plate onto the C4 tranny. Do any of you, off the top of your head know what size they are so I have some vague idea what to ask for when I see the nut and bolt man ???

Thanks in advance

J1

MustangNut · « **Reply #1 on:** September 22, 2009, 06:07:13 pm »

Standard 5/16" UNC. In other words standard 1/2 spanner size. The threads get a lot of grit in them so it's a good idea to run a thread chaser through them.

j1autotech · « **Reply #2 on:** September 23, 2009, 01:25:54 am »

:( Thanks MustangNut,

dropped into good old Bunnings after I fitted IGALOPS wheels to the car.

Picked up a pack of High Tensile 5/16" x 3/4" UNC bolts and spring washers to suit. Cleaned the threads and that 5 min. job is complete.

Ready for RWC in the morning

J1

MustangNut · « **Reply #3 on:** September 23, 2009, 06:18:39 am »

Cool, good luck with the rego Nazi's..

usa289 · « **Reply #4 on:** September 23, 2009, 07:24:02 pm »

Yeh! Good luck with the rego mate... always an exciting time :-)

USA289

C4 inspection plate bolt sizes

News:

Author Topic: C4 inspection plate bolt sizes (Read 5218 times)