Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Menu ≡
×
Home
Help
Search
Login
Register
Home
Help
Search
Login
Register
Mustang Owners Club Australia Forum
»
Technical & General Discussion Area
»
Tech Torque Pre 1973
»
Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline (Read 2950 times)
jiffy
Supercharged
Posts: 2324
Location: Elanora
Name: Jeff
jiffy
Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
«
on:
June 23, 2023, 12:01:42 pm »
Something like this, but ideally local, and cheaper...
https://www.centerforce.com/i-30499672-centerforce-i-and-ii-clutch-friction-disc.html
Logged
Black '69 CJ 4SPD car under construction (425/504)
Black 2002 SVT Cobra - 2003 Terminator Clone (575rwhp/716rwtq - SOLD)
Black ‘63.5 Galaxie 4SPD fastback (just you wait...)
GEOFF289
Blue Printed
Posts: 1643
Location: Melbourne
GEOFF289
Re: Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
«
Reply #1 on:
June 23, 2023, 04:09:43 pm »
Amazon will deliver one of those to you for $384 AUD, likely cheaper than the direct from Centerforce price once exchange rate and shipping are factored in. Bit of a wait though.
https://www.amazon.com.au/Centerforce-381942-Clutch-Friction-Disc-381942/dp/B000P58LC4
I found some suppliers listing that part no. as being 11 inches rather than 11.5 which is a bit confusing. If 11 will do local outfit Speedparts have this McLeod.
https://www.speedparts.com.au/~971157
Logged
jiffy
Supercharged
Posts: 2324
Location: Elanora
Name: Jeff
jiffy
Re: Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
«
Reply #2 on:
June 23, 2023, 04:57:17 pm »
Interesting - the picture on Amazon shows a much finer spline for the input shaft.
https://www.amazon.com.au/Centerforce-381942-Clutch-Friction-Disc-381942/dp/B000P58LC4
Logged
Black '69 CJ 4SPD car under construction (425/504)
Black 2002 SVT Cobra - 2003 Terminator Clone (575rwhp/716rwtq - SOLD)
Black ‘63.5 Galaxie 4SPD fastback (just you wait...)
GEOFF289
Blue Printed
Posts: 1643
Location: Melbourne
GEOFF289
Re: Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
«
Reply #3 on:
June 23, 2023, 05:18:23 pm »
It does Jeff. The page from the Centerforce website itself you provided the link to says "Generic Image" although it does look like a 10 spline deal. Very likely the Amazon image is also generic. Part no. is the same.
As I said, that part no. on Summit shows as 11 inches rather than 11.5
https://www.summitracing.com/parts/ctf-381942
while on Jegs they say the diameter is 11.5 but the disc diameter is 11. Go figure.
https://www.jegs.com/i/Centerforce/183/381942/10002/-1
Logged
jiffy
Supercharged
Posts: 2324
Location: Elanora
Name: Jeff
jiffy
Re: Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
«
Reply #4 on:
June 27, 2023, 01:15:03 pm »
interesting - I have asked Jegs the question as they list 3 different measurements
Disc Diameter (mm) 279
Diameter 11.5 in (292.1 mm)
Disc Diameter 11 in (279.4 mm)
However, I'm trying to decide if I should pull the trigger on this plate - it's cheap but shipping is not friendly?
https://www.ebay.com/itm/374084040330
«
Last Edit: June 27, 2023, 01:22:57 pm by jiffy
»
Logged
Black '69 CJ 4SPD car under construction (425/504)
Black 2002 SVT Cobra - 2003 Terminator Clone (575rwhp/716rwtq - SOLD)
Black ‘63.5 Galaxie 4SPD fastback (just you wait...)
GEOFF289
Blue Printed
Posts: 1643
Location: Melbourne
GEOFF289
Re: Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
«
Reply #5 on:
June 27, 2023, 04:54:30 pm »
I see that Ebay one is listed as re-manufactured.
Do you have the old plate you're replacing? If so, maybe its worth looking into getting it rebuilt locally, e.g.
https://directclutch.com.au/
Probably cost more than the $100 AUD or so the USD price for the Ebay would come to but you'd avoid the postage, probably get it sooner and getting it done just up the road from you seems less risky?
Logged
SMH00N
Thoroughbred
Posts: 150
Location: Sydney
Name: Stephen
Car: 70 Sportsroof Grabber pac
SMH00N
Re: Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
«
Reply #6 on:
June 27, 2023, 05:48:57 pm »
If Elanora is Sydney, then Western Clutch is the place to go.
If Elanora is QLD, well, I got nothing
Logged
jiffy
Supercharged
Posts: 2324
Location: Elanora
Name: Jeff
jiffy
Re: Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
«
Reply #7 on:
June 27, 2023, 06:10:25 pm »
I have a rebuilt clutch disk already, but it appears too thick to allow the pressure-plate to be compressed.
Plate:
Installed:
You can see the clearance between the fingers and the friction plate isn't enough to allow the fingers to release the friction plate.
Logged
Black '69 CJ 4SPD car under construction (425/504)
Black 2002 SVT Cobra - 2003 Terminator Clone (575rwhp/716rwtq - SOLD)
Black ‘63.5 Galaxie 4SPD fastback (just you wait...)
GEOFF289
Blue Printed
Posts: 1643
Location: Melbourne
GEOFF289
Re: Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
«
Reply #8 on:
June 28, 2023, 10:11:59 am »
Yeah, that's thick alright. I guess you'd need to verify the thickness of the Ebay one before committing.
I think I'm out, good luck with it.
Logged
jiffy
Supercharged
Posts: 2324
Location: Elanora
Name: Jeff
jiffy
Re: Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline
«
Reply #9 on:
June 28, 2023, 11:51:40 am »
well - I made an offer and it was accepted.
I'll ship via Ship7 to reduce it from $120US shipping and see.
If it all goes horribly wrong, then I'll buy a complete clutch package I think
Logged
Black '69 CJ 4SPD car under construction (425/504)
Black 2002 SVT Cobra - 2003 Terminator Clone (575rwhp/716rwtq - SOLD)
Black ‘63.5 Galaxie 4SPD fastback (just you wait...)
Print
Pages: [
1
]
Go Up
« previous
next »
Mustang Owners Club Australia Forum
»
Technical & General Discussion Area
»
Tech Torque Pre 1973
»
Can anyone point me at new clutch plate - 11.5 inch, 10 spline 1 & 1/16th spline