Question: My brake (Stop) Lights have stopped responding when I push the brake pedal. I know the circuit breaker for the Stop lights is in the Headlamp switch but the headlamps work (High and low beam) and the tail lights also work. I have checked the bulbs and grounds and they all fine. I know the wiring goes through the turn signal switch after the brake switch, but both the indicators work front and back. In the absence of a multi-meter/voltmeter, I un-clipped and jumped the wires from the brake (Stop) light switch with a wire to see if the lights would come on, and it turns out they don't - so from that I guess there is an issue with getting power to or from the switch. Is it possible the turn switch is faulty if the indicators still work, of that there is an issue with the Headlamp switch if all the other lights work, or do I likely have a break in wiring somewhere? kindest Regards, and thanks in advance. Matt. (p.s) I'm going to get a meter, just not 100% on how to use one yet.