65/66 RHD Steering Parts

Mustang Australia

Author Topic: 65/66 RHD Steering Parts  (Read 1768 times)

Offline GGT66

  • Stallion
  • **
  • Posts: 73
  • MOCA VIC Member since 2012
  • Location: Melbourne
  • Name: George
  • Car: 66 GT Coupe
65/66 RHD Steering Parts
« on: September 25, 2021, 03:33:15 pm »
RHD parts available for 65/66 Mustang
Parts are brand new and never used (except as stated below). Parts were to enhance a RHD car by installing power steering with a collapsible steering column shaft but now no longer required

New manual Scott Drake drag link re-engineered to suit RHD setup

NOS Ford XF power steering box (NOT reco -purchased 12 years ago, one of the last available as a last bulk purchase from OEM manufacturer by power steering shops)

NOS Ford steering box coupling

Used Falcon XR/XT manual steering box (solid shaft)
Used XB falcon steering column shaft (to be used with coupling)

Used Falcon XF accelerator linkage/pedal with NOS pedal springs

call if interested with any parts
0407 847 297
« Last Edit: November 12, 2021, 08:51:32 pm by GGT66 »

Offline albanygt40

  • Pony
  • **
  • Posts: 27
Re: 65/66 RHD Parts
« Reply #1 on: October 30, 2021, 12:12:04 am »
Hi
Any chance you still the XT steering box?

Cheers
Dave

Offline coops

  • Thoroughbred
  • **
  • Posts: 147
  • been here a little while!
  • Location: Darwin NT
Re: 65/66 RHD Parts
« Reply #2 on: October 30, 2021, 03:13:59 pm »
Hi George. I'm interested to know about the Scott Drake re-engineered drag link. Is this something that is sold as a RHD drag link from Scott Drake or was it altered in Australia to suit a Falcon steering box and if so is it certified for use on a registered car in Australia. Any advice is greatly appreciated. Cheers Ken
66 and 69 coupes.

Offline GGT66

  • Stallion
  • **
  • Posts: 73
  • MOCA VIC Member since 2012
  • Location: Melbourne
  • Name: George
  • Car: 66 GT Coupe
Re: 65/66 RHD Parts
« Reply #3 on: October 31, 2021, 07:49:06 pm »
Hi Ken, no, it is not a RHD drag link by Scott Drake. it was altered for RHD by an engineering shop in Melbourne by swapping the pin on the opposite side. (To be used with Falcon steering box). I believe its a certified item as its a one piece item and not cut and shut. What makes it certified??      Call me if you need to discuss further.
« Last Edit: November 01, 2021, 09:36:24 am by GGT66 »

Offline GGT66

  • Stallion
  • **
  • Posts: 73
  • MOCA VIC Member since 2012
  • Location: Melbourne
  • Name: George
  • Car: 66 GT Coupe
Re: 65/66 RHD Parts
« Reply #4 on: October 31, 2021, 07:58:19 pm »
Yes Dave, I still have the XT steering box.