Restored '70 428CJ Shaker $2500
set of new fender bolts and captive nuts $10
Pair of good used 69/70 door mechanisms $20
Pair of new door striker plates $10
Pair of internal door handles and rods $20
Fuel tube $10
Set of correct new radiator and heater clamps 390/428 $10
Rear bumper to tail-light panel rubber dust seal $10
Rubber gaskets for mounting rear spoiler $5
Pair 69/70 Quarter window lower pivots $50 (fastback only)
Big block engine mount rubber insulators $25 each
Big block engine mount set (3/side) $100
Black sunvisors w/mounts. Visors good, mounts corroded. $free
70 front valance used original no rust $20
'69 non-A/C heater resistor pack - $15
65/66 reversing light/rear valance seals, new repro, opened $5
69 fuel line clips used set - $10
70 RH front indicator - used, sound needs resto $10
69/70 big block upper clutch rod used $10
69 LH front indicator needs new lens but sound $10
67-70 pink toploader 31-spline output shaft speedo gear (for 3.50:1-4.30:1 rear end ratios) new but fitted once - $15
390/428 crank pulley 3 sheave (for P/S cars) C8AE-6312D $100
390/428 Partial SMOG setup - working CJ SMOG pump & non-a/c pulley, manifolds, valves, canister & bracket (leaking diaphragm), no hoses $750
69 non-tach, non-A/C dash harness really good $100
Would prefer pick-up in Rowville SE Suburbs or shipping if buying multiple items, but all this stuff needs to go....