It's been a very long while between posts but I finally have something to share. The Chrome Molly, Roll Cage is now finished! Here's a shot through the left door. The Dash, is now removable (bolted in). The Tilton Pedal Box and XE Falcon Steering Column will be supported by the Roll Cage (under Dash Bar) with extra brackets to the Fire Wall.
Next shot, through the windscreen, gives a good view of the A-Pillar tags and how much reinforcing is in the Cage structure.
Here's the right hand side with the Driver's Seat installed. Seating position is now much lower than original on fabricated RHS tubes.
And through the rear window.
Finally, this image shows the Cage tied in to the front Shock Tower structure and also the location of the ZF Electric Power Steering Pump.