030 stamped into the pistons

Mustang Australia

Poll

30 thou over and glazed cylinder walls what to do?

bore out
0 (0%)
resleeve
0 (0%)
new block
0 (0%)
hone the cylinders and put it all back together
1 (100%)
I have a better idea for you anfo
0 (0%)

Total Members Voted: 1

Voting closed: November 06, 2013, 03:07:44 pm

« previous next »
Pages: [1]   Go Down

Author Topic: 030 stamped into the pistons  (Read 1887 times)

Offline anfo99

  • Worked
  • ***
  • Posts: 272
  • MOCA Nova Member
  • Location: Toronto
  • Name: Anthony
anfo99
030 stamped into the pistons
« on: November 02, 2013, 04:34:04 pm »
Hey guys,

Just pulled the heads of the 289 and cleaned some carbon muck from the top of the pistons and saw stamped on them 030 and below that P7006. I'm guessing the 030 means that they are 30 thou over? No idea what the P7006 means any ideas? Could it be a part no?

Cheers anfo

Logged
Anfo - Starting to enjoy driving her!
"Do what you want to do, be what you wanna be..."
Masters Apprentices
6R07C

Offline shaunp

  • GT 500
  • *********
  • Posts: 8496
  • Location: Brisbane
shaunp
Re: 030 stamped into the pistons
« Reply #1 on: November 02, 2013, 04:40:53 pm »
Yes on both counts
Logged

Offline anfo99

  • Worked
  • ***
  • Posts: 272
  • MOCA Nova Member
  • Location: Toronto
  • Name: Anthony
anfo99
Re: 030 stamped into the pistons
« Reply #2 on: November 02, 2013, 04:52:35 pm »
thanks Shaun you're a legend
Logged
Anfo - Starting to enjoy driving her!
"Do what you want to do, be what you wanna be..."
Masters Apprentices
6R07C

Offline Macka

  • Shelby
  • *********
  • Posts: 6720
  • Vic member 1571
Macka
Re: 030 stamped into the pistons
« Reply #3 on: November 02, 2013, 08:57:36 pm »
Anfo, yes on both.  Brand name might be cast inside somewhere.
Logged
Pages: [1]   Go Up
« previous next »