Author Topic: What did you do for your Mustang today? (Read 658120 times)

Dwayne · « **Reply #1825 on:** July 10, 2016, 07:40:08 pm »

Fitted an export brace this weekend, don't want to do another one for a long time. Towers had sunk in about an inch so slowly spread them out and made sure everything was nice and square. Also fitted some new KYB shocks and the harsh rattley bumpy ride has now disappeared.

Sixtisix · « **Reply #1826 on:** July 13, 2016, 09:42:33 pm »

Today I cleaned up my boot and restored my spare wheel, had fun getting the vibrant white back on the stripe..
I'd love to know if I have the OG wheel, it has the ford logo stamped in it with 6ME Stamped directly under.

Cadd · « **Reply #1827 on:** July 15, 2016, 06:07:00 pm »

Well got my 68 back today and very happy ..new pushrods after bending one ..no damage thank god ..and new headers and full 2.5 twin system

Salthorse · « **Reply #1828 on:** July 15, 2016, 08:31:21 pm »

Picked up my '16 GT after is was treated with Opti Coat Pro+. The shine is sensational. I can recommend Bon Vivant in Williamstown North.

Dwayne · « **Reply #1829 on:** July 15, 2016, 09:08:16 pm »

That's gorgeous!!!!!

Salthorse · « **Reply #1830 on:** July 16, 2016, 09:00:46 am »

The photo doesn't do the finish justice either. It's better in the "flesh".

66vert · « **Reply #1831 on:** July 21, 2016, 04:29:46 am »

Went to see Robin & Linda at Mustang auto parts. Then surprised my daughter that works in the city to take her out for a daddy daughter lunch date.

Sundance Kid · « **Reply #1832 on:** July 21, 2016, 07:00:04 pm »

nice day for a drive ...

66vert · « **Reply #1833 on:** July 22, 2016, 04:36:05 am »

Quote from: Mediumblue on July 21, 2016, 07:00:04 pm

nice day for a drive ...

It was Tony, she sounded good bouncing of the buildings in the city mate.

skev · « **Reply #1834 on:** September 27, 2016, 08:02:14 am »

Installed rhe 24 inch alloy radiator, plumbed it in then stuck a monte carli bar in.

GEOFF289 · « **Reply #1835 on:** October 01, 2016, 09:34:33 am »

Installed my export brace yesterday. Not as tricky as some stories you read, only a tiny bit of grinding to elongate one bolt hole to get it to drop into place. Looking forward to taking it out to see what difference it's made if it ever stops raining here.

69ISH · « **Reply #1836 on:** October 01, 2016, 06:28:42 pm »

Took the Prostars with ET Streets off finally, should have come off weeks ago. Scored a bargain on a set of ET Streets that are now on my AR500,s and put them back on the stang after polishing the wheels, it will be interesting to see how long the ET,s last when they're used all the time instead of just track time.
Cleaned the stang for the first time in about 7 weeks which would be the longest it has gone without a clean.
Drove it down to the servo to fill up and then home again ready to go to Tumbulgum Tavern for lunch tomorrow and then a drive home through Murwillumbah and past the Natural Arch.

mwizz · « **Reply #1837 on:** October 01, 2016, 09:36:14 pm »

Got the peace of mind 3 month service done on my 2016 Mustang this morning

Bucks · « **Reply #1838 on:** October 02, 2016, 10:50:44 am »

Evo · « **Reply #1839 on:** October 03, 2016, 07:43:22 am »

Flushed the diff out a couple of times.
Put in new axle seals and filled it with fresh oil.
Backing plates back on again with new wheel cyclinders.
Just gotta fit the new drums and pads and adjust em up.
And fit the Monte Carlo bar.
And a big thanks to Harrys Classic Mustang Parts, you guys have been great.

Mustangpaul · « **Reply #1840 on:** October 04, 2016, 01:59:19 pm »

I paid the bloddy speeding fine, next time I hope my car will behave itself, another fine mess it got me into, On my way to Church I was too.

66vert · « **Reply #1841 on:** October 09, 2016, 06:31:10 pm »

Went for a early morning run up to Maleny/Montville then a pit stop at Ricks garage at Palmwoods for some photos then back through the sunshine coast on the way home. Got rain on at Montville.

mwizz · « **Reply #1842 on:** October 09, 2016, 06:41:14 pm »

Gave the 2016 a nice wash

Dwayne · « **Reply #1843 on:** October 09, 2016, 06:55:34 pm »

Started stripping off all the old paint in the engine bay. This is going to be a very long & messy job me thinks.

mwizz · « **Reply #1844 on:** October 09, 2016, 10:36:12 pm »

Quote from: Dwayne on October 09, 2016, 06:55:34 pm

Started stripping off all the old paint in the engine bay. This is going to be a very long & messy job me thinks.

But it will look so good when you are done.

Evo · « **Reply #1845 on:** October 10, 2016, 07:09:08 am »

Quote from: 66vert on October 09, 2016, 06:31:10 pm

Went for a early morning run up to Maleny/Montville then a pit stop at Ricks garage at Palmwoods for some photos then back through the sunshine coast on the way home. Got rain on at Montville.

Ahhhh
I grew up in Palmwoods, fond memories.....

boss69hogg · « **Reply #1846 on:** October 14, 2016, 05:58:20 pm »

Bought her a friend

pat · « **Reply #1847 on:** October 15, 2016, 08:26:13 pm »

Washed it, dried it, showed it off

Salthorse · « **Reply #1848 on:** October 16, 2016, 12:13:28 am »

Replaced the American Thunder mufflers with a pair of huskies. Drone gone, tinny sound gone, EPA no longer on the look out. Just a nice growl; not a roar. I can even hear the radio.

scedd1 · « **Reply #1849 on:** October 16, 2016, 05:59:44 am »

Quote from: boss69hogg on October 14, 2016, 05:58:20 pm

Bought her a friend

The "Friend" seems much younger, so now she is a Cougar instead of a Mustang.

What did you do for your Mustang today?

News:

Author Topic: What did you do for your Mustang today? (Read 658120 times)