Inspection and importing from Seattle

Mustang Australia

Author Topic: Inspection and importing from Seattle  (Read 2129 times)

Offline Jochlela

  • L Plates
  • *
  • Posts: 1
Inspection and importing from Seattle
« on: August 28, 2011, 06:16:53 pm »
I have done the searches but there is nothing recent or relevant for inspecting a Mustang at Poulsbo (state of Washington) and importing from Seattle to Brisbane.

Any recommendations for both would be appreciated as I'm interested in a 68 GT/CS.

Thanks.

Offline derwin66

  • Blue Printed
  • ****
  • Posts: 1126
Inspection and importing from Seattle
« Reply #1 on: August 28, 2011, 07:03:20 pm »
Try Brett_T he will be able to give some handy hints
65 T code coupe.
Blown 302. Heidts suspension, tricked C4
Gear vendors overdrive, RRS rack and pinion
Street or track roller perches adjustable struts.
60 F100.
Warm 289, AOD

Offline dalex

  • Worked
  • ***
  • Posts: 642
Inspection and importing from Seattle
« Reply #2 on: August 28, 2011, 08:27:20 pm »
Poulsbo is not that easy to get to with Puget Sound.  The North West Mustang Club is pretty vibrant and they could be worth reaching out to.

http://www.mustangsnorthwest.org/

I know there is a guy near Portland who inspects and arranges import as one of the Victorian members sourced a vert through him, he is a few hours away though and I do not have his details, but I know the purchaser was very happy with his services.

I used to live close to this area, but never hooked up with the Mustang community while there. One plus about the area is they are all greenies and do not salt the roads when it snows.


Offline Brett_T

  • Worked
  • ***
  • Posts: 564
Inspection and importing from Seattle
« Reply #3 on: August 29, 2011, 05:54:28 pm »
I could assist... pm me if you want