Mustang Owners Club Australia Forum

Classifieds by Forum Members => Wanted To Buy => Topic started by: JC074 on September 07, 2010, 05:45:56 pm

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: JC074 on September 07, 2010, 05:45:56 pm

G'day Guys

Need a 289 or 302 for a '66 auto - need it rather quickly....pref rebuilt engine - no more that 30".... will look at long and short motors...

JC

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: JC074 on September 08, 2010, 11:01:20 am

I dont think there is anyone fromn Perth in this forum anymore...see ya!

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: JC074 on September 08, 2010, 02:58:08 pm

Got one - cheers

JC

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: EXHAUSTED on September 08, 2010, 08:19:08 pm

Quote from: JC074 link=topic=12174.msg128808#msg128808

I dont think there is anyone fromn Perth in this forum anymore...see ya!

Whataya mean!!!!!:therethere::smile01:

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: Dyn4mic on September 08, 2010, 08:34:44 pm

Quote from: EXHAUSTED link=topic=12174.msg128861#msg128861

Quote from: JC074 link=topic=12174.msg128808#msg128808

I dont think there is anyone fromn Perth in this forum anymore...see ya!

Whataya mean!!!!!:therethere::smile01:

anyone of use he means pete :bats: :rol:

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: JC074 on September 08, 2010, 09:42:37 pm

Yeah dude - all good just had a few emails from ES dudes - nobody in perth sadly

scored a 289 anywho - all good :)

rock on
JC

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: EXHAUSTED on September 09, 2010, 12:35:58 am

I'm chasing up on a 302 / 5.0 EFI complete engine, gearbox, driveshaft, comp, loom etc for spares. Was asking $600  I offered $400. See what comes of it. I'm pretty sure I know where there are some early 289 blocks, etc. Will look into it.

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: JC074 on September 09, 2010, 10:26:45 am

Please do - im still always on the look out :)

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: EXHAUSTED on September 15, 2010, 09:07:53 pm

Came across a couple of complete 302 Windsor motors today (EB / ED Falcon roller motors)
complete with injection gear etc $300-ish probably need a bit of work!! Good for spares?

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: JC074 on September 15, 2010, 09:39:09 pm

Dude.... Ill take one!

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: EXHAUSTED on September 16, 2010, 12:18:44 am

U2U sent

Title: WTB: 289 or 302 - must be a runner (pref newly rebuilt)
Post by: jas24zzk on September 16, 2010, 12:34:31 am

Roller motors with an edelbrock performer and 600 vac sec absolutley fly!

just the ducks nuts!