Technical & General Discussion Area > Technical - General
C4 auto
(1/1)
wilso:
1966 Mustang C4
Looking for some help with my C4. I just did a rebuild on my C4 and now it will not shift into 3 gear. It shifts 1 & 2 but not 3rd.
i replaced all the bands clutches and bushings and iron rings.The only thing i changed in the vale body was the gaskets.
USA066:
May be obvious, but are you moving the gear shifter to the correct position. Needs be in the 0 mark
Clubman7:
Only thing I can think of is if you removed the valve body.
Have a look at this.
https://www.youtube.com/watch?v=Jmdia6EJpGc
GLENN 70:
Check the line on the vacuum modulator. If you bring it up to a fair speed in 2 nd gear then put it into 3rd / drive back off and see if it drops into 3rd . Is it changing quite hard into 2nd gear ?
Navigation
[0] Message Index
Go to full version