Mustang Owners Club Australia Forum

Technical & General Discussion Area => Tech Torque Pre 1973 => Topic started by: Glen on August 08, 2021, 09:37:07 am

Title: Vinyl roof moudling removal 64 1/2 - 66
Post by: Glen on August 08, 2021, 09:37:07 am

Hi All,
Have been trying to find tips or a tutorial on the removal of this rear vinyl roof moulding with no luck so far. 
Other mouldings came off easy but this has me stumped. 
Any help would be appreciated. 
Thanks.   

Title: Re: Vinyl roof moudling removal 64 1/2 - 66
Post by: Glen on August 09, 2021, 06:40:21 am

Thanks, I was suspect of this after seeing some of these part available to purchase with a nut.  Will take a look and confirm. 

Title: Re: Vinyl roof moudling removal 64 1/2 - 66
Post by: Glen on September 15, 2021, 02:14:54 pm

Quick update.  There are definitely little speed nuts on the back on these trim pieces and they are a bitch to remove.
If you need to purchase any more I found them at Repco, Mustang Auto Parts only sell a smaller product.   

Title: Re: Vinyl roof moudling removal 64 1/2 - 66
Post by: Glen on September 15, 2021, 02:18:20 pm

Photos aren't uploading for some reason.  Rare Spares Part # NS0004 "Speed Nut 7/16" Hex Suit 1/4" Stud"

Title: Re: Vinyl roof moudling removal 64 1/2 - 66
Post by: barnett468 on November 10, 2021, 01:23:32 pm

you will likely need someone to pry outward on the trim as you unscrew the nuts, or vice versa.