Mustang Owners Club Australia Forum

Technical & General Discussion Area => Tech Torque Pre 1973 => Topic started by: HEVEN67 on September 03, 2007, 03:55:10 pm

Title: Painless wiring
Post by: HEVEN67 on September 03, 2007, 03:55:10 pm: Hi Folks
Well I had a drama when I smoked the wiring on fathers day, well to cut a short story long, I will do a patch up and today I ordered a Painless wiring 20121 for my 67.
Has anyone got any input to the installation woes! good or bad
Title: Painless wiring
Post by: jas24zzk on September 04, 2007, 12:28:09 am: Yer,
the guys building cobra's hate em.
Good to install but a pita later when you have a problem. Not enough colours.

They adapt in E-series falcon looms...have everything you could ever need, and a wiring diagram that makes sense.

Jas
Title: Painless wiring
Post by: HEVEN67 on September 04, 2007, 10:30:12 am: Hi Jase
Do you know wheather they plug into all the appliences as the recken
Title: Painless wiring
Post by: jas24zzk on September 04, 2007, 09:00:44 pm: Never actually used one myself. The one time i did a full re-wire i used an E-series loom

Cheers
Jas
Title: Painless wiring
Post by: HEVEN67 on September 08, 2007, 10:27:02 am: Thanks folks the response was deafining!
Title: Painless wiring
Post by: ron on September 08, 2007, 10:54:58 am: Well gee HEV, I think that most of us are fortunate enough not to have toasted our electrics :+
Title: Painless wiring
Post by: 2233 on September 08, 2007, 11:21:16 am: Or care enough to actually fix it :w

Like I said to ED at the dyno day..........Just put a match to it :+:+:+:+
Title: Painless wiring
Post by: edd666 on September 08, 2007, 07:28:55 pm: echo did say that,heven if echo happens to visit and offers his help just say no or make sure hes got no matches
Title: Painless wiring
Post by: HEVEN67 on September 08, 2007, 07:43:54 pm: Quote
Originally posted by edd666
echo did say that,heven if echo happens to visit and offers his help just say no or make sure hes got no matches

Oh;x
I dont need him to have problems, I went to my mates house this arvo to get a sqizz at his XB gt and When I left I give a it a squirt and it spat another belt, I think the alternator pulley is too small and the drive surface area isnt enough, see I can make my own dramas!
But yes Edd I did sence that he has a pyro streak!
Other than that its flying.
Also I mounted the thermo fan on an aluminium spacer so as it gets a more even flow of hot air from the radiator and it seems to be working a treat.
Title: Painless wiring
Post by: edd666 on September 08, 2007, 07:52:25 pm: heven if u remember i also had dramas with that ebay alternator mine fell apart internally though the auto elect changed my small pulley to a larger one says that the smaller one may have contributed to the problem
Title: Painless wiring
Post by: HEVEN67 on September 08, 2007, 08:09:39 pm: F M D! Thats exactly been the drama, the noise suppressor fell out and caused a dead short which caused the toast to burn, and now the fan belt! F.M.D! Goes to show they sell some sh! t!
Title: Painless wiring
Post by: edd666 on September 08, 2007, 08:35:10 pm: i think its been the dearest and sh!ttest alternator we ever owned not to mention the others that got sucked or do u think we were the only ones that fell for the chrome
Title: Painless wiring
Post by: ron on September 08, 2007, 10:13:56 pm: FMD ;w, Took me a while to work it out because I haven't heard that phrase in years... Fark Me Dead!!:a:+
Title: Painless wiring
Post by: HEVEN67 on September 09, 2007, 07:13:42 pm: Quote
Originally posted by edd666
i think its been the dearest and sh!ttest alternator we ever owned not to mention the others that got sucked or do u think we were the only ones that fell for the chrome

I think we love the shiny stuff too much and it sucks us in! but if yours carked it and mine had the same, how many others?
Im gonna message him an tell him! Wheels within wheels wasnt it?:[

F M D ;w Further My Dialog :+ Your rude Ron! (but we all know that)
Title: Painless wiring
Post by: ron on September 09, 2007, 07:24:54 pm: OOoopps.. my bad:*
Title: Painless wiring
Post by: edd666 on September 09, 2007, 09:04:28 pm: thats the one wheels within wheels
Title: Painless wiring
Post by: edd666 on September 09, 2007, 09:09:58 pm: thats the one wheels within wheels
Title: Painless wiring
Post by: HEVEN67 on September 09, 2007, 10:12:36 pm: Quote
Originally posted by edd666
thats the one wheels within wheels

Didnt you buy that huge Dizzy from them?
Title: Painless wiring
Post by: edd666 on September 10, 2007, 06:36:31 pm: no i bought that from a mob at belmore couldnt ever make the same mistake dealing with them again