Mustang Owners Club Australia Forum
Technical & General Discussion Area => Tech Torque Pre 1973 => Topic started by: thruster on October 20, 2011, 08:26:53 am
-
Hi all;
I have a hazzard light switch in the glove box of my 66 that has broken and would like to know if this is a switch I could buy from an electronics shop like JCAR or D/S ETC, it has 4 wires that go to it and Im thinking it shouldn't be such a big deal to change as long as I can find the correct switch so any advice would be great.
cheers!
-
why not replace it with the right part...................
http://store.sacramento-mustang.com/1966-emergency-flasher-switch-without-pigtail-for-late-1966-p2416.aspx
-
Have you got a pic of the front and back of the switch?
-
Thanks guys but I just wanted to get it done yesterday and I think I might have it done I bought a $5 switch and will see how it goes otherwise I will just have to order one and wait.
Cheers.
-
Hi all, just an up date I have 4 wires that connect on the back of the switch,(1)BLUE- always live
(2)GREEN-Front drivers blinker
(3)WHITE-Front pass blinker
(4)GREEN-with red marker does both rear blinkers.
2,3 and 4 have no power going to them unless you turn on the blinkers and that when it all goes to the dogs. As I can simply join 2,3,4 and have on one side of switch and 1 on other side which works great as hazzard lights BUT when I turn on the blinkers, even in off position, the blinkers dont work. I know its because Im getting 12 V on 2,3,4 I'm just not sure how the original switch isolates them when not in use :banghead:well I hope that this makes sense and if anyone has been through this before please drop me a line. I think I will order this switch and have to wait for its arrival .
Cheers .
-
Hi Thruster,
sent U2U
-
We have the correct switch in stock $60