1
Mustang Chat Room / Re: Aussie (Motorcraft) 4300 carbs
« Last post by pmb0186 on Yesterday at 10:03:31 pm »I’m running a 4100 and found it pretty good
Recent Posts
News:
Recent Posts
2
Mustang Chat Room / Aussie (Motorcraft) 4300 carbs
« Last post by RocketScientist on Yesterday at 04:13:11 pm »The Autolite 4300 carbs on 67 (and other) Mustangs were pretty bad and I was wondering what the later Motorcarft ones on Australian cars were like? Did they go any better or were just as bad?
Brad
Brad
3
Mustang Chat Room / exhaust shop near the Mornington Peninsula in Melbourne?
« Last post by pbapam on April 30, 2024, 08:39:43 am »Hi all. Can anyone recommend a good, reliable exhaust shop near the Mornington Peninsula in Melbourne that knows vintage mustangs? Cheers
4
Tech Torque Pre 1973 / Re: Extractors
« Last post by FB.65.68.70 on April 29, 2024, 03:26:02 pm »Craig,
have a look at the pacemaker website. ph4010 is for mustangs .
https://pacemaker.com.au/collections/headers?gf_134464=Make_Ford&gf_194885=Type_Mustang&gf_194886=Year_1968&gf_194887=Model_1st+Generation
have a look at the pacemaker website. ph4010 is for mustangs .
https://pacemaker.com.au/collections/headers?gf_134464=Make_Ford&gf_194885=Type_Mustang&gf_194886=Year_1968&gf_194887=Model_1st+Generation
5
Tech Torque Pre 1973 / Extractors
« Last post by Craigb on April 29, 2024, 02:59:09 pm »I have modified my 68 to RHD with Total Control Products Rack and Pinion, Intalled is a TKX gearbox to the original Windsor small block which is now a 347 with Edelbrock heads.
Can anyone recommend what extractors will fit this combo Ive been told Pacemaker PH4010 for an XY ect but its a $1K toss of the coin.
Can anyone recommend what extractors will fit this combo Ive been told Pacemaker PH4010 for an XY ect but its a $1K toss of the coin.
6
Mustang Chat Room / 68 Coupe Project
« Last post by Fx4Ranger on April 29, 2024, 09:27:47 am »Just purchased a 68 Coupe as a project and was wondering if anyone might know of its previous owners, the rego used to be 1AGR059 and was owned by Alex Ormerod from Maida Vale.
The reason i,m asking is because I am finding a lot of hidden faults and before I spend a lot of money on the rebuild would appreciate any information about its history. Thanks.
The reason i,m asking is because I am finding a lot of hidden faults and before I spend a lot of money on the rebuild would appreciate any information about its history. Thanks.
7
Mustang Chat Room / Re: Starter motor
« Last post by Mylittlepony1966 on April 29, 2024, 06:30:12 am »Thanks will do.
8
Mustang Chat Room / Re: Starter motor
« Last post by Aussie-67 on April 28, 2024, 07:28:03 pm »Have a look at these. Have one on my 302w for some years now. I'm running a c4 and full length extractors. I did add a heat shield as well.
https://www.partsforhotrods.com.au/shop/ford-windsorcleveland-engine-parts/starter-motors/ford-14kw-reduction-starter-motor-suit-windsor-cleveland
https://www.partsforhotrods.com.au/shop/ford-windsorcleveland-engine-parts/starter-motors/ford-14kw-reduction-starter-motor-suit-windsor-cleveland
9
Mustang Chat Room / Starter motor
« Last post by Mylittlepony1966 on April 28, 2024, 08:28:53 am »I am chasing information for a descent starter motor please???What starter motors & where from.
I made the mistake of buying an OEX piece of rubbish. Suggestions appreciated
1966
Headers
C4
I made the mistake of buying an OEX piece of rubbish. Suggestions appreciated
1966
Headers
C4
10
Tech Torque Pre 1973 / Re: 65 Fastback resto dash pad
« Last post by hamgr on April 25, 2024, 10:37:08 am »thanks for the info..
Graham
Graham