Mustang Owners Club Australia Forum

Technical & General Discussion Area => Tech Torque 1979 to 2014 => Topic started by: PONI04 on January 18, 2018, 01:13:16 pm

Title: Front alignment
Post by: PONI04 on January 18, 2018, 01:13:16 pm

Can  someone tell me the toe in/toe out specs for a 2004 GT, thanks

Title: Re: Front alignment
Post by: Clubman7 on January 18, 2018, 06:04:58 pm

Dr Google said this:
This is straight from fords workshop manual
Alignment Specifications — GT and Base ItemLHRHTotal/SplitFrontCaster3.2° ± 0.75°3.2° ± 0.75°0° ± 0.75°Camber-0.50° ± 0.75°-0.50° ± 0.75°0° ± 0.75°Toe (positive value is toe-in, negative value is toe-out)——0.25° ± 0.25°

General Specifications ItemSpecification
Front Ride HeightFront4 mm ± 7.6 mm (0.2 in. ± 0.3 in.)
Rear Ride HeightRear — GT and Base128 mm (5 in.)Rear — Cobra18 mm ± 7.6 mm (1.4 in. ± 0.3 in.)
Vehicle Lean (Side-to-Side Differences)

Front — maximum13 mm (0.5 in.)Rear — maximum13 mm
DogtrackingMaximum13 mm (0.5 in.)Clear vision (negative value is counterclockwise)-2° ± 3°Ball Joint DeflectionLower ball joint0-0.3 mm (0-0.012 in)

From All Ford Mustangs Forum.
Good luck.

Title: Re: Front alignment
Post by: PONI04 on January 20, 2018, 04:10:17 pm

Thanks Brett