Mustang Owners Club Australia Forum
Technical & General Discussion Area => Technical - General => Topic started by: jiffy on August 11, 2009, 12:56:39 pm
-
(http://www.mustangphotos.com/photopost/data/500/medium/Upper_control_arms.jpg)
(http://www.mustangphotos.com/photopost/data/500/medium/Upper_control_arms2.jpg)
-
Seen this?
http://www.pdf-to-jpg.com/
-
Scan it & save as a .jpg that works for me.
-
I ended up cutting & pasting into Powerpoint - you can then save it all as a picture file - then loaded it onto a website and put the links into the page!
Took a while, but there it is...
-
Well done, now I know that as well! Thanks
-
This might be a dumb question - is this mod still useful on a car with a coilover front end (ie. RRS ) ?
I have the stage one kit that retains the stock upper and lower control arms.
Cheers,
Frank.
-
Originally posted by Frank70
This might be a dumb question - is this mod still useful on a car with a coilover front end (ie. RRS ) ?
I have the stage one kit that retains the stock upper and lower control arms.
Cheers,
Frank.
The RRS coilover front end is a strut, so does not have an upper A arm. Not a particulary good "handling" mod as there is no camber gain.
The TCP coilover however does benifit from the "drop" & the top A arm they produce has the "drop" built in, if you wish. Also has the taper built in on the ball joint so it does not bind.
(http://i728.photobucket.com/albums/ww284/Downresto/Misc%20Mustang%20stuff/TCPupperarm.jpg)
-
Thanks Kerry.
You know I never realised that the upper A arm was gone !
Cheers,
Frank.
-
Originally posted by Frank70
Thanks Kerry.
You know I never realised that the upper A arm was gone !
Cheers,
Frank.
Didnt you miss the squeak? :+
-
hehe
-
Originally posted by Frank70
hehe
Jeez. I know your sig says you live here but 4.37AM;x
-
Originally posted by Frank70
This might be a dumb question - is this mod still useful on a car with a coilover front end (ie. RRS ) ?
I have the stage one kit that retains the stock upper and lower control arms.
Cheers,
Frank.
so Frank - do you still use the stock upper & lower control arms - or is the top one gone as per your next post? If you still have the stock upper, then the mod is an option for you, if you have an aftermarket one, or don't have one at all, then you should be fine at the geometry is likely to have changed anyway...