Mustang Owners Club Australia Forum
Technical & General Discussion Area => Tech Torque Pre 1973 => Topic started by: GSD on April 23, 2021, 10:33:23 am
-
Hi there,
Hoping the some of you might be able to help me, you guys have a wealth of knowledge.
I am in need of recommendations around Sydney of who can carry out the following:
- Overhaul of 390 FE engine, is there a minimum scope of work that you can recommend. Not after huge performance, just a cruiser
- 4 speed top loader gearbox overhaul
- 9" diff, doesn't have to be concourse but period correct, where can i get one
Thanks in advance.
-
Which area in Sydney?
-
I'm not a Sydneysider but the smart money is usually on taking it to Big Al.
https://www.bigalsmustangs.com.au/
-
Anywhere in Sydney, willing to travel wherever it may be.
-
Give Al a call, if he can't do it then he'll certainly know who can.
-
i would do a couple of the oiling system mods like run a cj oil filter adapter, enlage the oil feed hole, and put a restrictor (70 holley main jet) in the oil feed hole to the rockers.
blue printed oil pump with high perf oil pump drive
more info here
https://www.diyford.com/ford-fe-engine-oiling-system-complete-guide/
(http://www.fordification.com/board2/feheadrestrict1.jpg)
-
Westend Performance at Campbeltown
did all machining and balancing and some head work for my 438 that i assembled
will be taking another 351 to them soon
-
Hi there,
Hoping the some of you might be able to help me, you guys have a wealth of knowledge.
I am in need of recommendations around Sydney of who can carry out the following:
- Overhaul of 390 FE engine, is there a minimum scope of work that you can recommend. Not after huge performance, just a cruiser
- 4 speed top loader gearbox overhaul
- 9" diff, doesn't have to be concourse but period correct, where can i get one
Thanks in advance.
Like someone else said, I would recommend Big Al as well.