HALF DRIVE SHAFTS - REBUILD

Mustang Australia

Author Topic: HALF DRIVE SHAFTS - REBUILD  (Read 1880 times)

Offline Giffo

  • Worked
  • ***
  • Posts: 364
  • LIFE IS A MUSTANG
  • Location: Sydney
  • Name: Steve G
HALF DRIVE SHAFTS - REBUILD
« on: May 03, 2021, 06:35:44 pm »
Is there anyone that knows who can rebuild drive half shafts in Sydney?  I have the 2001/2 Mustang Cobra with IRS rear end.

cheers
2002 MUSTANG COBRA - 4.6 SVT 5 SPEED - CONVERTIBLE.
Lowered Kings Springs, 3.73 diff gears, JTG CAI,  18" ROVOS DURBAN RIMS. MGW Short Shifter.  Slotted brake rotors. 2 1/2" SS Exhaust with Magnaflow high flow cats and mufflers.

Offline sms777

  • Worked
  • ***
  • Posts: 533
  • Location: Townsville
Re: HALF DRIVE SHAFTS - REBUILD
« Reply #1 on: May 05, 2021, 07:35:16 pm »
I have used A&L Driveshafts in Belmore for over 20 years. Very fast and cheap. Call Tony on 9787 1655.

Offline Giffo

  • Worked
  • ***
  • Posts: 364
  • LIFE IS A MUSTANG
  • Location: Sydney
  • Name: Steve G
Re: HALF DRIVE SHAFTS - REBUILD
« Reply #2 on: May 06, 2021, 05:25:21 pm »
Thanks. Will call them soon.

 :thumb:
2002 MUSTANG COBRA - 4.6 SVT 5 SPEED - CONVERTIBLE.
Lowered Kings Springs, 3.73 diff gears, JTG CAI,  18" ROVOS DURBAN RIMS. MGW Short Shifter.  Slotted brake rotors. 2 1/2" SS Exhaust with Magnaflow high flow cats and mufflers.

Offline jiffy

  • Supercharged
  • *****
  • Posts: 2321
  • Location: Elanora
  • Name: Jeff
Re: HALF DRIVE SHAFTS - REBUILD
« Reply #3 on: May 07, 2021, 09:33:21 am »
Hi Steve - seriously, you've worn out your half-shafts??

I'm still going on with the originals - what was the symptom that alerted you?
Black '69 CJ 4SPD car under construction (425/504)
Black 2002 SVT Cobra - 2003 Terminator Clone (575rwhp/716rwtq - SOLD)
Black ‘63.5 Galaxie 4SPD fastback (just you wait...)

Offline Giffo

  • Worked
  • ***
  • Posts: 364
  • LIFE IS A MUSTANG
  • Location: Sydney
  • Name: Steve G
Re: HALF DRIVE SHAFTS - REBUILD
« Reply #4 on: May 08, 2021, 09:55:53 pm »
Ever since I put in new diff and gears I have had a rear vibration in the rear over 80 plus kph. Load and not. Tail shaft balanced after checking wheel balance. Whole rear end was new. Im lost as to what it may be. Half shafts is all I can think of. Going to jack it up and check the torque settings on the half shafts when I get a chance, The diff mob said all good their end?? Process of elimination really.


Hi Steve - seriously, you've worn out your half-shafts??

I'm still going on with the originals - what was the symptom that alerted you?
2002 MUSTANG COBRA - 4.6 SVT 5 SPEED - CONVERTIBLE.
Lowered Kings Springs, 3.73 diff gears, JTG CAI,  18" ROVOS DURBAN RIMS. MGW Short Shifter.  Slotted brake rotors. 2 1/2" SS Exhaust with Magnaflow high flow cats and mufflers.