Mustang Owners Club Australia Forum
Technical & General Discussion Area => Tech Torque Pre 1973 => Topic started by: HAMBURGLAR on June 01, 2016, 05:59:54 pm
-
Good evening ladies and gentlemen. Does anyone know the axle offset for a 66 8in. Its said its either 2.5 or 2.66 but I can only get near 2.4 or less without taking the drum brake backing plate off. Would I be correct if I measured from front of axle housing flange to the front of the axle flange. Seems I wouldn't get close to 2.66.
-
2 1/2" brake gap
-
Thanks 289vert , I finally took everything off and measured it properly. Fitted the brakes , all good. Cheers.