Non resistor plugs

Mustang Australia
« previous next »
Pages: [1]   Go Down

Author Topic: Non resistor plugs  (Read 1489 times)

Offline Shep69

  • Worked
  • ***
  • Posts: 231
Shep69
Non resistor plugs
« on: September 28, 2021, 11:29:44 pm »
I just purchased an Ice ignition kit for my 85 block 302w . Ice says I must use non resistor plugs.
Anyone have a good recommendation for spark plugs.
TIA
« Last Edit: September 28, 2021, 11:38:16 pm by Shep69 »
Logged

Offline AussiePhil

  • Worked
  • ***
  • Posts: 786
  • Location: Bathurst, NSW
  • Name: Phil
  • Car: 68 Coupe
AussiePhil
Re: Non resistor plugs
« Reply #1 on: September 29, 2021, 08:02:35 pm »
Hey shep,
I’m interested what ICE ignition are you using!
I’ve got ICE 4300 LS1 individual coils and I’m using NGK BPR6FS with 5K ohm resistors.
My instructions from ICE don’t mention anything about spark plugs.
I’m waiting on a response from their website on the LS1 coil plugs required.
Cheers Phil.
Logged
If you've never buggered anything you've never done anything!
But if you've buggered a lot maybe you're not very good at it!

Two for one is good but four for two is better!

Offline Shep69

  • Worked
  • ***
  • Posts: 231
Shep69
Re: Non resistor plugs
« Reply #2 on: September 29, 2021, 11:46:42 pm »
Quote from: AussiePhil on September 29, 2021, 08:02:35 pm
Hey shep,
I’m interested what ICE ignition are you using!
I’ve got ICE 4300 LS1 individual coils and I’m using NGK BPR6FS with 5K ohm resistors.
My instructions from ICE don’t mention anything about spark plugs.
I’m waiting on a response from their website on the LS1 coil plugs required.
Cheers Phil.
Hi Phil.
I’m running the 7amp street ignition setup with the map sensor that’s built in .
I rang Michael from Ice today and he put me onto the NGK BP5FS. These are non resistor plugs.
Give him a call and he will help you out.
Logged
Pages: [1]   Go Up
« previous next »