Do you have to degree a new cam ?

Mustang Australia

Author Topic: Do you have to degree a new cam ?  (Read 482728 times)

Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #650 on: March 24, 2016, 10:56:44 am »
What now ?

Nothing, just clean the pan as described then install the lower gear after you sand it more and the timing chain and quit dropping stuff in the pan .  :lmao:

Offline Fitzy1980

  • Blue Printed
  • ****
  • Posts: 1256
  • I'm new here
Re: Do you have to degree a new cam ?
« Reply #651 on: March 24, 2016, 12:19:39 pm »
Nothing, just clean the pan as described then install the lower gear after you sand it more and the timing chain and quit dropping stuff in the pan .  :lmao:

Shhhhh,  :toetapping:

No one needs to know about that..  :lmao:

Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #652 on: March 24, 2016, 12:31:39 pm »
Shhhhh,  :toetapping:

No one needs to know about that..  :lmao:

know about what .  :lmao:

Offline GLENN 70

  • GT 500
  • *********
  • Posts: 8620
  • Location: Gold Coast .
Re: Do you have to degree a new cam ?
« Reply #653 on: March 24, 2016, 12:34:29 pm »
Well what fell into the sump/pan   :lmao: .

Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #654 on: March 24, 2016, 12:36:41 pm »
Well what fell into the sump/pan   :lmao: .

 :lmao:

Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #655 on: March 24, 2016, 12:37:35 pm »
.
Hey Fritzy, do all aussies work as slow as you do?

Offline Fitzy1980

  • Blue Printed
  • ****
  • Posts: 1256
  • I'm new here
Re: Do you have to degree a new cam ?
« Reply #656 on: March 24, 2016, 01:08:04 pm »
.
Hey Fritzy, do all aussies work as slow as you do?

 :lmao: :lmao: :lmao:

Redundancy from mining means i'm very much a man of leisure these days.

I'm a bit like those filthy Queenslander's any slower i'd go backwards some days....  :lmao: :lmao:  :bolt:

 

Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #657 on: March 24, 2016, 01:13:49 pm »

I'm a bit like those filthy Queenslander's any slower i'd go backwards some days....  :lmao: :lmao:  :bolt:

Are they the same as Lawn Bowlers?

..............
« Last Edit: March 24, 2016, 01:15:21 pm by barnett468 »

Offline Fitzy1980

  • Blue Printed
  • ****
  • Posts: 1256
  • I'm new here
Re: Do you have to degree a new cam ?
« Reply #658 on: March 24, 2016, 02:04:35 pm »
Are they the same as Lawn Bowlers?

..............


Yeah, they come up with this genius...  :lmao: :lmao: :lmao: :lmao: :lmao:

http://i1.kym-cdn.com/photos/images/newsfeed/000/455/248/009.png

Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #659 on: March 24, 2016, 02:07:39 pm »

Yeah, they come up with this genius...  :lmao: :lmao: :lmao: :lmao: :lmao:


Is that because they have no indoor bowling alleys?

Plese don't tell me that was a real ad for their train.

Offline Fitzy1980

  • Blue Printed
  • ****
  • Posts: 1256
  • I'm new here
Re: Do you have to degree a new cam ?
« Reply #660 on: March 24, 2016, 02:20:56 pm »
Is that because they have no indoor bowling alleys?

Plese don't tell me that was a real ad for their train.


Yeah, there 20 years behind the rest of us..


No, Queensland Rail came up with these posters on rail etiquette that came across really condescending so people took to making a joke out of them.

Offline Fitzy1980

  • Blue Printed
  • ****
  • Posts: 1256
  • I'm new here
Re: Do you have to degree a new cam ?
« Reply #661 on: March 24, 2016, 02:44:38 pm »
Happy now ?  :lol:

Are the dots close enough ? Or a is it 1 tooth off ?


2016-03-24_02-38-22 by , on Flickr

Offline GLENN 70

  • GT 500
  • *********
  • Posts: 8620
  • Location: Gold Coast .
Re: Do you have to degree a new cam ?
« Reply #662 on: March 24, 2016, 02:52:28 pm »
By that photo the crank doesn't look spot on anyway .

Offline Fitzy1980

  • Blue Printed
  • ****
  • Posts: 1256
  • I'm new here
Re: Do you have to degree a new cam ?
« Reply #663 on: March 24, 2016, 02:56:52 pm »
By that photo the crank doesn't look spot on anyway .

I thought that too, i think its the angle i took the photo on

Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #664 on: March 24, 2016, 02:59:11 pm »
yup thats it?

did you clean the pan?

why does the top gear look dirty?

how did the bottom gear go on?

did you put oil on the crank first?
« Last Edit: March 24, 2016, 03:08:05 pm by barnett468 »

Offline Fitzy1980

  • Blue Printed
  • ****
  • Posts: 1256
  • I'm new here
Re: Do you have to degree a new cam ?
« Reply #665 on: March 24, 2016, 03:04:47 pm »
yup thats it?

That's it ???

Is it right, wrong ?  :shrug:

did you clean the pan?

Yesir

why does the top gear look dirty?

Just my grubby paw prints

how did the bottom gear go on?

A lot better, a couple of tiny taps

did you put oil on the crank forst?

Liberally

Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #666 on: March 24, 2016, 03:06:44 pm »
that top gear has wax or something . that shit has to come off but it is on the back side of the gear too.

ROTATE THE CRANK A HAIR AND IT WILL LINE UP.

Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #667 on: March 24, 2016, 03:10:07 pm »
Did you find what you were looking for in the pan?


Offline Fitzy1980

  • Blue Printed
  • ****
  • Posts: 1256
  • I'm new here
Re: Do you have to degree a new cam ?
« Reply #668 on: March 24, 2016, 03:17:17 pm »
that top gear has wax or something . that shit has to come off but it is on the back side of the gear too.

I had assembly lube on my hands, i wiped it down but it just looks grubby.

I cleaned everything before it went on.

ROTATE THE CRANK A HAIR AND IT WILL LINE UP.

 :thumb:

Offline Fitzy1980

  • Blue Printed
  • ****
  • Posts: 1256
  • I'm new here
Re: Do you have to degree a new cam ?
« Reply #669 on: March 24, 2016, 03:18:26 pm »
Did you find what you were looking for in the pan?


Ahhhh, no....

 :thud:

Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #670 on: March 24, 2016, 03:20:03 pm »
clean that shit off of the top cam gear . its on the backside too.

there's a bunch of crap on the chain too.

Offline Fitzy1980

  • Blue Printed
  • ****
  • Posts: 1256
  • I'm new here
Re: Do you have to degree a new cam ?
« Reply #671 on: March 24, 2016, 03:25:16 pm »
clean that shit off of the top cam gear . its on the backside too.

there's a bunch of crap on the chain too.

It's oil/lube from my hands.

So, take the whole lot off and clean it ? huh ?


Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #672 on: March 24, 2016, 03:29:25 pm »
look at the photo

the gear looks like it has a white wax on it

look a the left side just below the center, it is lumpy so something is on it.

the chain looks like t has sand on it.

what is all this crap?

oil is ok but theres more than oil on it.

your gear should look clean like this


« Last Edit: March 24, 2016, 03:36:30 pm by barnett468 »

Offline Fitzy1980

  • Blue Printed
  • ****
  • Posts: 1256
  • I'm new here
Re: Do you have to degree a new cam ?
« Reply #673 on: March 24, 2016, 03:38:30 pm »
look at the photo

the gear looks like it has a white wax on it

look a the left side just below the center, it is lumpy so something is on it.

the chain looks like t has sand on it.

what is all this crap?

oil is ok but theres more than oil on it.

Ok, i took the photo with my phone. There is nothing but oil/lube on the gear and chain, the reflections etc from the sun make it look like that.

I've been making sure i keep everything clean.

If it's meant to look like that than ill have to wet sand the whole thing.  :lmao:

The old one was the same colour
« Last Edit: March 24, 2016, 03:40:36 pm by Fitzy1980 »

Offline barnett468

  • Cobra
  • *********
  • Posts: 7174
Re: Do you have to degree a new cam ?
« Reply #674 on: March 24, 2016, 03:51:10 pm »
If it's meant to look like that than ill have to wet sand the whole thing.  :lmao:


Do you have some 600 grit paper?  :lmao: