Author Topic: Removing antenna off a 69 (Read 1433 times)

mjb0015 · « **on:** February 05, 2010, 10:23:44 am »

Hi everyone, I am having trouble removing my antenna off my 69, is there any trick to this, do I need to remove the inner guard?

mjb

tim_morrison82 · « **Reply #1 on:** February 05, 2010, 12:16:01 pm »

i am pretty sure there is either a clip or a nut holding the antenna in place. which is only accessable behind the panel.

well at least thats what i found with my 68.

tim_morrison82 · « **Reply #2 on:** February 05, 2010, 12:17:30 pm »

there maybe an easier way in there...?

soc123_au · « **Reply #3 on:** February 05, 2010, 12:52:48 pm »

It depends on the Antena & where its located on the guard. You will most likely need to remove the splashtray & then you should be able to access the nut. They are often siezed so give it a hit with inox or wd40. Also the inner shaft can spin with the nut, if that happens its time to break out the grinder.

mjb0015 · « **Reply #4 on:** February 05, 2010, 02:51:14 pm »

Thanks everyone, I will let you know how I went

mjb

non member · « **Reply #5 on:** February 05, 2010, 06:49:56 pm »

Rectangular base antenna would be on them standard. The base (stainless steel) unclips & you can slide it up the mast. Then you will see 4 phillips headed screws holding the base down.

Removing antenna off a 69

News:

Author Topic: Removing antenna off a 69 (Read 1433 times)