Technical & General Discussion Area > Technical - General
C4 inspection plate bolt sizes
(1/1)
j1autotech:
Hey guys,
I'm missing the 2 bolts that hold the inspection plate onto the C4 tranny. Do any of you, off the top of your head know what size they are so I have some vague idea what to ask for when I see the nut and bolt man ???
Thanks in advance
J1
MustangNut:
Standard 5/16" UNC. In other words standard 1/2 spanner size. The threads get a lot of grit in them so it's a good idea to run a thread chaser through them.
j1autotech:
:( Thanks MustangNut,
dropped into good old Bunnings after I fitted IGALOPS wheels to the car.
Picked up a pack of High Tensile 5/16" x 3/4" UNC bolts and spring washers to suit. Cleaned the threads and that 5 min. job is complete.
Ready for RWC in the morning
J1
MustangNut:
Cool, good luck with the rego Nazi's..
usa289:
Yeh! Good luck with the rego mate... always an exciting time :-)
USA289
Navigation
[0] Message Index
Go to full version