tacho wire up

Mustang Australia
« previous next »
Pages: [1]   Go Down

Author Topic: tacho wire up  (Read 5003 times)

Offline T-CODE KID

  • Worked
  • ***
  • Posts: 444
  • Location: MELBOURNEs WEST
  • Name: https://www.
T-CODE KID
tacho wire up
« on: April 27, 2009, 11:08:47 pm »
i want to fit /wire up a tacho with 3 terminals

1 is ground 

1 is sig

1 ign

not too sure  about where signal & ignition go
any help appreciated thanx
« Last Edit: June 12, 2016, 07:31:22 pm by T-CODE KID »
Logged

Offline Macka

  • Shelby
  • *********
  • Posts: 6720
  • Vic member 1571
Macka
tacho wire up
« Reply #1 on: April 27, 2009, 11:16:36 pm »
Logged

Offline T-CODE KID

  • Worked
  • ***
  • Posts: 444
  • Location: MELBOURNEs WEST
  • Name: https://www.
T-CODE KID
tacho wire up
« Reply #2 on: April 27, 2009, 11:24:16 pm »
thanx mac1

checked link but mine has no wires

just  3 male terminals sticking out
Logged

Offline shaunp

  • GT 500
  • *********
  • Posts: 8496
  • Location: Brisbane
shaunp
tacho wire up
« Reply #3 on: April 28, 2009, 11:23:51 am »
Sig goes to the neg side of coil or CDI tacho drive wire.
ign to +12V
Logged

Offline T-CODE KID

  • Worked
  • ***
  • Posts: 444
  • Location: MELBOURNEs WEST
  • Name: https://www.
T-CODE KID
tacho wire up
« Reply #4 on: April 28, 2009, 07:01:52 pm »
Sig goes to the neg side of coil or CDI tacho drive wire.
ign to +12V
Logged
Pages: [1]   Go Up
« previous next »