Club Magazine Advertisers and Sponsors

Started by peterp, November 24, 2008, 12:30:54 PM

Previous topic - Next topic

peterp

This area is for Commercial Advertisers and Sponsors who support the Mustang Club by Advertising in our Club Magazines or Sponsor our Club Venues.

Please don't post in this section if you do not meet the above criteria as your post will be removed.

If you would like to post in this section but are not sure how to go about it you are welcome to email me your add with or without photos and I will post it for you.
webeditor@mustang.org.au

Please support our sponsors, They support the Mustang Club.

peterp
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the Duct Tape.

mussy65

 
BLKPNY

Each state does their own thing.  Would suggest you make contact with one of the committee members from each state you wish to be involved in.  As you are in Victoria, I assume Victoria would be of most interest to you however that assumption may not be correct. I am sure the Victorians would be very happy to discuss something, particularly with Ballarat Nationals fast approaching (Easter).

In NSW, we have magazine advertisers (annually or short term available) as well as sponsors supporting a lot of our major events throughout the year.

I would recommend you check out each of the State web sites and shoot off an email with your contact details to the President of the state(s) you are interested in.

Good luck but if any difficulties, send me a U2U message.


Muz015

Is it possible to just advertise in this blog?   I have just ordered a Mustang GT from my local dealer and thought it would be great to also promote my ecommerce site that I manage https://shop.caps.com.au/
As it is air tools, cordless tool, compressors etc they are perfect for those restoring their cars. It is mostly Ingersoll Rand as the Company I work for is the primary distributor in Australia.  I could also look at a discount code for members!

I actually wanted a 67 fastback "Shelby tribute" but my wife wasn't keen.   So the compromise was a new one!

Cheers
Gordon