Technical & General Discussion Area > Tech Torque Pre 1973
64 /14 brake lights
(1/1)
Phillip28:
Hi all getting to the end of a long restoration and have put a new wiring kit in my 64 1/2 nut can’t get brake lights to work there are only 2 wires going into tail lights does anyone know how this set up works before I have to spend money on a auto electrician thanks Phil ps the new wiring kit is American auto wire . Also indicators and lights all work just no brakes.
GEOFF289:
I'd be looking at the brake light switch then.
I think in a 64 car this is a pressure switch on the master cylinder so my experience with my '66 which has a mechanical switch on the pedal arm won't help but I had no end of trouble with it and eventually replaced it with a micro switch and have had no more trouble.
Phillip28:
Hi thanks have put a switch on the pedal but looking at the research I have done on the internet it may have something to do with the combo switch on the steering column which I replaced and rewired problem being the repo ones have different wire colours and no instructions so I may have got something wrong.
Navigation
[0] Message Index
Go to full version