Technical & General Discussion Area > General Chat Room

Wheel Alignment- Perth

<< < (2/4) > >>

Aussie-67:
I hear that.  I have the street or track suspension set up so I use their recommended settings.

pmb0186:
By interest what are the specs?
Maybe an interesting topic

Aussie-67:

--- Quote from: pmb0186 on May 03, 2023, 02:55:13 pm ---By interest what are the specs?
Maybe an interesting topic

--- End quote ---

I typically use the Open Tracker settings.  Sorry, said earlier Street or Track (SoT) but meant Open tracker.  I have the SoT adjustable strut rods and the Open Tracker roller suspension.

Settings as follows (link to the site - https://opentrackerracing.com/tech-info/)

STREET SPECS *
Caster:
+2° to +3.5° Manual Steer
+2.5° to +4.5° Power Steer

Camber:
0 to -.5°

Toe:
1/8″ in

STREET PERFORMANCE SPECS *
Caster:
+2.0° to +3.5° Manual Steer
+2.5° to +4.5° Power Steer

Camber:
-.5° to -1.5°

Toe:
1/8″ in

* Caster and camber settings should be the same on both sides for proper handling.

pmb0186:
Good work, interesting at least to me
My specs
Stock suspension and tyres with electric power steering
+ 5.5 caster
0 camber
1/8 toe
Intend to add more caster as return to centre still a little light

Aussie-67:
That's within the specs above.  Must handle ok.

I was recently charged a significant sum by a reputable shop and its still not right.  Would love to be able to do the alignment myself.

Navigation

[0] Message Index

[#] Next page

[*] Previous page