More HP for 2017 GT

Mustang Australia

Author Topic: More HP for 2017 GT  (Read 4152 times)

Offline 139MTR

  • L Plates
  • *
  • Posts: 3
  • I'm new here
  • Location: Wollongong
  • Name: Peter
  • Car: FM Mustang Coupe
More HP for 2017 GT
« on: December 31, 2020, 03:36:11 pm »
Hi, after advice please. Have the Ford Racing/Roush Blower that came with the Tickford package. Looking at a smaller pulley 76mm, injectors, fuel pump, bigger TB. This combo should see it easily go past 750HP? Cheers

Offline Clubman7

  • Worked
  • ***
  • Posts: 554
  • Cruising.
  • Location: Mornington Peninsula
  • Name: Brett
  • Car: 1966 coupe, 2016 GT.
Re: More HP for 2017 GT
« Reply #1 on: December 31, 2020, 07:31:05 pm »
Getting it retuned as well?

Offline 139MTR

  • L Plates
  • *
  • Posts: 3
  • I'm new here
  • Location: Wollongong
  • Name: Peter
  • Car: FM Mustang Coupe
Re: More HP for 2017 GT
« Reply #2 on: December 31, 2020, 09:38:09 pm »
Yes, was thinking the KPM fuel components but not sure where to get the pulley and if a bigger TB is available. Don’t think the twin cobra jet 65mm suits?

Offline Clubman7

  • Worked
  • ***
  • Posts: 554
  • Cruising.
  • Location: Mornington Peninsula
  • Name: Brett
  • Car: 1966 coupe, 2016 GT.
Re: More HP for 2017 GT
« Reply #3 on: January 01, 2021, 08:10:25 am »
Have a read here.

https://www.mustang6g.com/forums/threads/how-much-horsepower-is-the-roush-2-3-capable-of-making.127172/

Some guys with more experience.
Seems like they tune for e85 to be safe.
TVS2.3l supercharger may be at the limit without going for a larger supercharger.

Offline 139MTR

  • L Plates
  • *
  • Posts: 3
  • I'm new here
  • Location: Wollongong
  • Name: Peter
  • Car: FM Mustang Coupe
Re: More HP for 2017 GT
« Reply #4 on: January 02, 2021, 10:23:49 am »
Thanks, same supercharger is on the 18-20 with the 80mm pulley, ngk injectors and bigger injectors. I assume it’s still a conservative setup.