Windsor to Toploader Bellhousing

[Gastill]

Hello All

I'm seeking a Windsor to Top Loader Bell Housing P/n C5AA-6394-B if possible, location no issue I can arrange transport, would need you to box up, RHS Starter, 164 Tooth flywheel, ally or steel is OK if outside Perth area. Would prefer if it also had the fork but can live with it not available. Condition needs to be good no missing lugs.


Thanks
Greg 

[shaunp]

164 tooth fly wheel you want a Cleveland one then, same bolt pattern just a bit fatter further back, if you get an Aussie one it will be hydraulic clutch as well.

[trav68]

Double check whether the Toploader and Single Rail gearboxes share the same bolt pattern and input bearing spigot dimension - then you could use a commonly available local Falcon clevo bellhousing from a wrecker.

Otherwise Castlemain Rod Shop or Dellows do off the shelf versions to suit your application.

[Gastill]

Hey thanks guys, appreciate that advise

Greg

[trav68]

If you end up using a local Clevo bellhousing then Rare Spares will have the clutch fork and any good brake place will be able to supply the slave, throwout bearing etc...

[6508k]

I have an original housing if you are still chasing one .part no C5AA6394B.......$250 ....Cheers