Author Topic: New Mustang in Qld (Read 16785 times)

shelby_mustro · « **Reply #25 on:** December 10, 2007, 07:09:36 pm »

Hahaha you guys are funny :w:w:w
But seriously I am never going to paint my car red lol ;3

Brett_T · « **Reply #26 on:** December 10, 2007, 07:31:24 pm »

I do have your number, but had it on my other phone.. will hopefully be out and about this weekend.. as long as i dont have to work...so will try and catch up with you, and check out your pony..

shelby_mustro · « **Reply #27 on:** December 10, 2007, 08:18:54 pm »

Yea no worries Brett:( Hopefully I can show you some of the stuff I’ve been up to the last few months. Also I was just wondering if you happen to find out about getting that address for that diff place so I can change my diff over to 5 stud.
Cheers Ryan,

Brett_T · « **Reply #28 on:** December 10, 2007, 09:27:59 pm »

will put it on the list of things to do... tomorrow.. maybe i should buy one of those round tooits...;)

Brett_T · « **Reply #29 on:** December 10, 2007, 09:29:51 pm »

Sorry BLU302.. how did you get on with the wiring?? sorted??

BLU302 · « **Reply #30 on:** December 11, 2007, 09:16:20 am »

Not yet,I thought it was the immobilser but I think the ignition switch has shorted out.I'm a bit of a gumby with wiring so my son(mechanic) is going to have a look at it this week.
Bob

peter350h · « **Reply #31 on:** December 11, 2007, 06:53:07 pm »

nice work ryan. that stang will be very very nice when finished.

..............almost as good as mine is..........:+

jmd1 · « **Reply #32 on:** December 11, 2007, 07:57:56 pm »

Yeah but it still isn't red.....:+:+:+:+:+:+

peter350h · « **Reply #33 on:** December 11, 2007, 10:40:05 pm »

haha:+ owell. it should still go fast............hopefully. ;} na it will go great ryan. i would just like to see it finished by the end of next year at the latest.

did you end up rocking up to work late last fri? you had too many ;+ which turned to :a

you guys should have seen ryan at the beer garden chatting up the bar maid. what a pimp:f

BLU302 · « **Reply #34 on:** December 13, 2007, 11:31:07 am »

BLU302 is back on the road.I've replaced the original solenoid and the immobilizer fitted had an intermittent fault.So,should I source an original solenoid now and what am I going to replace the immobilizer with?
What security does everyone use.
Bob

scedd · « **Reply #35 on:** December 13, 2007, 12:36:40 pm »

Quote

What security does everyone use.
Bob

Ford Smartlock, Big son and a German Shepherd
Dogs on their own arent much good (They cant use a fire extinguisher), but this one can climb over a six foot fence, so anyone coming in would be fairly keen

derwin66 · « **Reply #36 on:** December 13, 2007, 02:17:33 pm »

Glock.45 with spare mag

BLU302 · « **Reply #37 on:** December 13, 2007, 02:33:00 pm »

Who do I give the gun to - My son or the Dog?

derwin66 · « **Reply #38 on:** December 13, 2007, 03:04:05 pm »

The smartest one:+

Brett_T · « **Reply #39 on:** December 13, 2007, 07:25:51 pm »

I suppose they will only try and steal it once...

jmd1 · « **Reply #40 on:** December 13, 2007, 07:44:21 pm »

Staying away from that one.:o

peter350h · « **Reply #41 on:** December 14, 2007, 12:06:42 am »

do you only keep one spare mag with you derwin? what about if you got into a hollywood type shoot out and needed an automatic rifle with a few hand grenades?

i got my secruity from autobahn. $160 installed and is immoblised to ignition and distributor.

my uncle told me that the best secruity is to pop the bonet, take out the distributor rotor and put it in ur pocket. its small so its wont be a nusence to you and the car deffinatly wont start without the rotor

BLU302 · « **Reply #42 on:** December 14, 2007, 09:51:28 am »

My Dad used to take the rotor out as well, but the one time he forgot the car was stolen(Mark 2 Zephyr).
Bob

BLU302 · « **Reply #43 on:** December 17, 2007, 09:41:17 am »

Thanks Peterp for putting my car's photo in my Avatar.Next I'll try to post some more pics.
Bob

New Mustang in Qld

News:

Author Topic: New Mustang in Qld (Read 16785 times)