6T9rustang, They had the car up on the hoist to pull the drivetrain out before i could get any photos.
Agree with you about the blackouts on the rear panel, but Jeremy wants to keep this car original - so no blackout.
While Luke finished wet rubbing the body with 800 grit wet rub, Brad was busy setting up the airlines in the booth -
One airline is to supply air to the spraygun and the other supplies air around the painters head. Tried the setup out - but Luke said that while the air keeps his head cool inside the mask, it uses too much of the available air. Bugger! Now we need a bigger compressor.
They finally rolled the Mach1 into the booth this morning and taped it up -
Here they are... very excited about finally painting the car
Luke got right into it -
Then he Baked it and eventually we rolled it out into the sun for close inspection -
We are absolutely delighted with it. Well done Brad and Luke.
Luke is preparing the bolt on panels for paint, while Brad and Jeremy get ready to start putting the car back together. We only have 6 weeks to get it finished.
Rocket.