power steering

Mustang Australia
« previous next »
Pages: [1]   Go Down

Author Topic: power steering  (Read 2926 times)

Offline Mustang_Dave

  • L Plates
  • *
  • Posts: 2
Mustang_Dave
power steering
« on: August 27, 2005, 08:26:25 pm »
ok, here is the newest of my problems.
My 65 convertible has power steering, however it is the old "ram type"
I am looking for the , much easier power steering box.
The ram style is very difficult to get hoses for and is very tightly squeezed underneath. I am constantly busting hoses as they are rubbing and there is simply not enough room to re route them.
So the question is: where can I buy a complete power steering box setup, and how much should I expect to pay.
Thanks in advance, guys
Logged

Offline Mustang_Dave

  • L Plates
  • *
  • Posts: 2
Mustang_Dave
power steering
« Reply #1 on: August 27, 2005, 08:42:28 pm »
oh, I forgot.... It is still left hand drive ! !! ! ! !
Logged

Offline Hally

  • Pony
  • **
  • Posts: 17
Hally
power steering
« Reply #2 on: August 27, 2005, 10:59:08 pm »
Dave,

If you are going to stay lhd why not look at RRS's rack and pinion steering. It is 'bolt in' with no fabrication required and they use an XF p/s pump. The racks are available for both right and left hand drive.

From speaking to people and looking at opinions from this and other forums it is seems to be a good bit of kit. If you go to there website www.rrs-online.com.au they will send you out a dvd and catalogue.

Regards,

Andrew
Logged
Pages: [1]   Go Up
« previous next »