Technical & General Discussion Area > Tech Torque Pre 1973

oils

<< < (3/3)

pgold:
Glen, my 69 with XC 2V takes a little over 4L with filter. I would do as Glen70 said start with 4L and check, lot easer to add more than take it out :grin:

Glen Mach 1:
Thanks guys,

Great advise and spot on as usual.  I was leaning this way but always good to have some experienced advice.

Cheers

Glen

AussiePhil:
Hey Glen,
Before you buy your oil check you have a standard size engine oil pan!
If not and the oil level is right on the dip stick empty the oil into measuring container.
Then you'll know what size container to buy!
Add a little bit more for your filter!
Cheers Phil.

Glen Mach 1:
Hi all,

The change went well.  I did a flush and let it drain out completely.  I put in ~5.8 litres which was surprising and when I have checked a few times it is in the middle of the "safe" zone on the dipstick.

Is this all ok any concerns?

Thanks

Glen

Navigation

[0] Message Index

[*] Previous page