Author Topic: Club number Plates - Sample Shown (Read 17620 times)

ponyride · « **Reply #75 on:** July 05, 2010, 07:07:35 pm »

Nice work Tim,
So we still have a limited run of 100 numbers but they can be any of the colours you have shown?

tim_morrison82 · « **Reply #76 on:** July 05, 2010, 08:39:53 pm »

the number letter combinations can still change. its just a sample. i haven't the patience to reword it just yet.

will wait to see what we can come up with as a team on the Club Plate Committee

Rock65 · « **Reply #77 on:** July 05, 2010, 09:35:51 pm »

Gday Tim,Would be happy to hear the feedback from tommorrow nites meeting. As i am working away could you please post info on the interest from the club.

ponyride · « **Reply #78 on:** July 05, 2010, 11:28:41 pm »

Quote from: tim_morrison82 link=topic=10823.msg118468#msg118468

the number letter combinations can still change. its just a sample. i haven't the patience to reword it just yet.

will wait to see what we can come up with as a team on the Club Plate Committee

Fair call. Massive effort on your part thus far Tim.

tim_morrison82 · « **Reply #79 on:** July 07, 2010, 12:51:59 pm »

After last nights meeting, i had recieved interest for 7 sets of plates. and that was just me stumbling over my ideas and asking for some help to design them.

as expected, a number of people are interested, but no one is willing to help out on the design and cost considerations for the plates. more work is needed, so i will be writing up a story for the club mag to get the idea out to all registered club members. i will also talk to the new treasurer, and try and fine tune the expected costs of the plates and incorporate the figures into a survey. this may be the only way to get an idea of what the majority of club members want.

it was a promising start to the club plate campaign. thanks for the support people. now lets make this work!

Cheers! Tim

ponyride · « **Reply #80 on:** July 07, 2010, 05:36:31 pm »

Tim I was a late scratching from the meeting last night, didn't get a chance to send my apologies. I'll help out wherever you need it with the whole plate thing, just U2U me if you like.

Rock65 · « **Reply #81 on:** July 07, 2010, 09:34:53 pm »

Gday Tim ,i also would be happy to help out,but work FI/FO. Home next Thurs. Send me an email with details........Rohan

Cully · « **Reply #82 on:** July 18, 2010, 04:33:49 pm »

I'd definately be interested in getting a set ;) Happy to help in anyway if i can :)

Cully · « **Reply #83 on:** July 18, 2010, 04:41:27 pm »

Oh and for my vote, I would go for the 3 numerals. Better range and means that if MOCWA grows, we can keep offereing them for new members.

tim_morrison82 · « **Reply #84 on:** July 18, 2010, 07:43:10 pm »

thanks Cully, send me a u2u with your contact details (mob, email, and suburb would be great!). i will try and write something up to get in the magazine. i will run it past all you guys that are interested in helping out to make sure that it has been conveyed in a manner that all will understand.

Cheers,

Tim

tim_morrison82 · « **Reply #85 on:** July 19, 2010, 01:30:45 am »

rick i lost your details...

can you resend?

cheers!

ponyride · « **Reply #86 on:** August 10, 2010, 03:28:25 pm »

Sorry Tim, I just read your last post. U2U sent.

tim_morrison82 · « **Reply #87 on:** August 10, 2010, 03:31:06 pm »

Thanks Rick.

tim_morrison82 · « **Reply #88 on:** November 01, 2010, 01:06:05 am »

Hi guys,

its been a while since i have had time to think about this more. talking with Rick more today about these plates and i think we will change the plates to have 3 letter and 3 numbers. this way we can use the extra digits to make a wider range of customised combinations.

i need to ask the department of transport if the number combinations can be customised as part of the club plate arrangement, or if the numbers must be consecutive.

We are considering a lower cost colour option than the yellow on black plates, to make the sets easier to afford.

If you are from WA and have not shown interest in getting hold of a set of plates, either for your mustang or your daily driver, please u2u or email or reply to this thread cause i need to find owners for 30 sets of plates.

cheers guys,

Tim

dalex · « **Reply #89 on:** November 01, 2010, 01:34:04 pm »

A couple of comment from a Victorian...

1) You have MOCA in the leters, yet the subtext in Mustang Owners Club of WA. It may be worth having them match so the abbreviation MOCA is understood by the average Joe.

2) It would be very cool if you get them US size.

cheers

Dale

tim_morrison82 · « **Reply #90 on:** November 02, 2010, 02:24:00 am »

change the bottom to say Mustang owners club of Australia? very little diff there, won't be much of an issue i don't think. especially when you have MOCA, the club logo AND Mustang owners club of Western Australia written on the bottom...

i am actually thinking that we could get some more interest in the plates if we open up the 40 character line under the plate to club members to come up with a slogan, instead of repeating ourselves 3 times on the plates... just an idea...

believe me, if US sized plates were an option, i'd be there already!

i gotta get back into the Mag with some more info. had some time off to sort my life out, now i am back to it, i should finish what i started!

tim_morrison82 · « **Reply #91 on:** March 16, 2011, 09:52:31 pm »

Called up the DOT yesterday and they said i should email any questions in.... i thought i did that months ago and they said call...

Plates CAN be ordered out of sequence! so we don't have to start numbers from 1 or 0! so thats a great thing. people can order their plates through the club as long as the plate is not already taken.

discussion is open on these topics:

what the bottom line should say -

what Letter combination will make up the "constant" on the plates -

What colour combo would be desirable -

please post comments on here, or email me at tim_morrison82@hotmail.com

cheers!

Club number Plates - Sample Shown

News:

Author Topic: Club number Plates - Sample Shown (Read 17620 times)